Juma PA100D, cablu de interconectare mcHF (ROW-CA3)

This cable interconnects the JUMA PA100D amplifier with mcHF HF QRP transceiver, for PTT(T/R) activation / enable. Additional to this cable, the user needs the BNC-BNC male coaxial cable for the drive signal of the PA100D PA, coming from mcHF. One end of this cable is plugged in the side panel of the mcHF TRx (ACC. jack) and the other end of this cable is plugged in the rear panel of the PA100-D amplifier (T/R – 3.5mm jack). The ends of this cable CAN NOT be reversed since the connections inside are different.


Technical details:

  • coding: visible white labels at both ends of the cable
  • manufacturer: roWaves Technologies
  • ordering code: ROW-CA3
  • connector 1: installed original cable 3.5mm plug connector
  • connector 2: 3.5mm stereo plug (Lumberg KLS-40)
  • length: 50cm
  • interconnects with: mcHF transceiver (@ ACC connector)

Quality flexible cable for interfacing the PA100D with mcHF transceiver, for PTT (T/R activation). Only manual band selection is available.

11,40 EUR (excl. TVA)

8 in stoc

Cable datasheet: © copyright roWaves Technologies

Greutate 100 g
Dimensiuni 10 × 5 × 3 cm

Recenzii

Nu există recenzii până acum.

Numai clienții autentificați, care au cumpărat acest produs, pot să scrie o recenzie.

Selectează moneda
×

Hi there, please start a chat window with us below or send us an email at support@rowaves.com. You can also use the contact form on the "Contact" page. We are available only  Monday to Friday, from 9-17h. Thank you!

× Get Help