€ 1,79 (excl. VAT)
* Toroids are tested for AL values at 10KHz.
| Parameter | Symbol | Value | Units |
|---|---|---|---|
| Initial permeability | µi | 800 | |
| Flux density @ field strength | B H | 2900 10 | Gauss Oersted |
| Residual flux density | Br | 1300 | Gauss |
| Coercive force | Hc | 0.45 | Oersted |
| Loss factor @ specific freq. | Tan δ/ µi | 250 1.0 | 10^-6 MHz |
| Temperature coefficient of initial permeability (20 -70°C) | 1.25 | %/°C | |
| Curie temperature | Tc | >130 | °C |
| Resistivity | ρ | 1×10^5 | ohm-cm |
Usable frequency ranges, depending on the application:
broadband transformers: 5 – 400 MHz
high-Q inductors: 0.5 – 30 MHz
RFI / EMI / CMC suppression: 5 – 500 MHz
✔️ common mode shocks (CMC): material 43 it is a very good solution for suppressing common broadband currents in the range of 10 – 600 MHz. Along with the increase no. of turns, the suppression increases, while the max. usable freq. will decrease.
✔️ broadband transformers: excellent impedance transformers can be made in the frequency range from 2 to 50 MHz Typical applications are impedance transformers for EndFed antennas, impedance transformers for OCFD antennas or BalUn 1: 1. Full technical specifications (including catalog description) at “Downloads”.
Technical data-sheet: 
| Weight | 2 g |
|---|---|
| Dimensions | 0,95 × 0,52 × 0,35 cm |
You must be logged in to post a review.
Hi there,
please choose one of our colleagues below, to request the information you need, or send us an email to support@rowaves.com. You can also use the contact form on the "Contact" page. We are available ONLY Monday to Friday, from 9-17h. Thank you!
Reviews
There are no reviews yet.