MFG2220HM, 2 x CH, 200MHz GWInstek Signal Generator

For sale GWInstek surplus signal generator. Condition: used in the lab for abt. 2 years. There are no scratches or significant signs of wear-out. It comes with original documentation and power supply cable. Calibration is still valid (done by manufacturer). Acquired in 2021 from Reichelt.de, works and looks like new. Shipping worldwide with DHL Express, as usually. Invoice issued.

All documentation is available on internet: https://www.gwinstek.com/en-global/products/detail/MFG-2000

• Maximum Five Output Channels
• 2 Equivalent Performance Arbitrary Channels Frequency : 1μHz~10/20/30/60/200MHz
• RF Channel Frequency (FG/ARB/MOD) : 160/320MHz
• Pulse Generator Frequency : 25MHz
• Power Amplifier : Low Frequency, 100kHz, Output 20W
• True Point by Point Output Arbitrary Waveform Function: MFG-2220HM Sample Rate: 250MSa/s, Repetition Rate: 125MHz; Other models Sample Rate: 200MSa/s, Repetition Rate: 100MHz, 14-bit Resolution, 16k Points Memory Depth
• Earth Ground Isolation Design Among I/O Terminals and Instrument Chassis (MFG-2220HM Excluded)
• Frequency Counter : 150MHz, 8 bits Frequency Resolution
• AM/FM/PM/ASK/FSK/PSK/SUM/PWM Modulation
• Built-in Medical and Automotive Electronic Waveforms(MFG-2220HM Excluded)
• USB Host/USB Device/LAN (MFG-22XX only)
• 4.3 Inch TFT color display

MFG-2000 series, which has up to 5 simultaneous output channels (MFG-2260MFA / MFG-2260MRA), including CH1 and CH2 equivalent performance dual channel arbitrary function generator with the maximum 60 MHz for both channels; RF signal generator, a standard AFG, which produces the maximum 320MHz sine wave and various modulation RF signals; pulse generator, whose frequency reaches 25MHz; power amplifier, which is ideal for audio range. The above-mentioned five different functionality channels are separately or totally allocated on 10 models, which extend from the basic single-channel AFG with pulse generator models to five-channel models so as to satisfy various educational and industrial applications.

With the multi-functionality channels, the MFG-2000 series provides different industrial sectors with special dual channel waveforms, IQ modulation signals, low-frequency vibration simulation, automotive sensors, AM/FM broadcast signals, PWM motor or fan control signals, pulse synchronized signals, pulse noise, audio circuit or devices such as speaker tests. The series is ideal for various fields, including scientific research, education, research and development, production and quality control.

The function generator channel of the MFG-2000 series outputs sine, square, and triangle, etc. The series features true point-by-point output arbitrary waveform characteristics of 200 MHz sample rate, 100 MHz waveform repetition rate, 14-bit resolution, and 16k point memory depth. Some models provide various modulation methods such as AM/FM/PM/FSK/PWM, Sweep, Burst, Trigger, 150 MHz Frequency Counter. Synchronized dual channel models provide correlated functions, including synchronization, delay, sum, and coupling. RF signal generator, a complete AFG signal source (including ARB), features various modulations, Sweep, and digital modulations such as ASK and PSK and its sine wave frequency is up to 320 MHz. A full-function pulse generator with 25 MHz is equipped to all models and its pulse width, rise edge time, fall edge time are adjustable that can be applied as trigger signals. Independent input/output power amplifier with 20 W, 10 dB, DC-100 kHz bandwidth, and distortion less than 0.1% can be applied to the audio application.

The overall design of the MFG-2000 series is earth ground isolation among output/input terminals and instrument chassis that can only be found in high-level signal sources. The output channels can sustain maximum isolation voltage up to ±42 Vpk (DC+ AC peak value) to earth ground that is ideal for floating circuit tests. Multi-unit outputs can be executed without factoring in grounding reference issue. There is no additional isolation requirement for experiments such as “full-wave rectification” and “voltage doubler” which are easy and safe. An external power supply can bring up the DC bias voltage to ±42 Vpk to meet the requirements of higher DC bias voltage such as automotive and educational applications.