SOLD OUT🔍
PA1000+ to IC-705 Bluetooth Gateway (JUMA)
PA1000+ to IC-705 Bluetooth Gateway (JUMA)
PA1000+ to IC-705 Bluetooth Gateway (JUMA)
  1. PA1000+ to IC-705 Bluetooth Gateway (JUMA)
  2. PA1000+ to IC-705 Bluetooth Gateway (JUMA)
  3. PA1000+ to IC-705 Bluetooth Gateway (JUMA)

PA1000+ to IC-705 Bluetooth Gateway (JUMA)

Icom IC-705 does not have a physical CI-V connector. The JUMA IC-705 gateway provides band data by using Bluetooth connection to IC-705. The output is BCD band data with open collector output and Yaesu band voltage. The DB9 male connector provides the band data. JUMA gateway can be powered with a standard USB power supply (micro USB) or with a 5V-15V DC (rear panel). Current draw is 120mA with 5V and 55mA with 12V.

The wireless Bluetooth connection is reliable when Icom IC-705 and JUMA gateway are located in the same hamshack. The small size (66mm x 66mm x 28mm) JUMA gateway can also be used with other linear amplifiers and also for other applications like antenna selection etc see the DB9 connector pin order here.

All cables needed are included in the price / package:

✔️ 1 x DB-9 cable (female-to-male with all pins connected) – to interface the gateway with PA1000
✔️ 1 x 3.5mm jack-to-jack cable – PTT cable for IC-705
✔️ 1 x microUSB cable for supplying the interface

See complete SET-UP instructions below at “Description”.

Extended specifications:
Power supply 1USBmicro-USB connector
Power supply 25...15Vdc (60...120mAdc)DC 2.1mm plug
Interface to PA1000+DB-9 connectorfemale-male, all pins connected
Bluetooth ver. BLE 5.0installed
Size66 x 66 x20mm
LED statusdiagnosis via LED statussee HERE

895,00 RON (excl. VAT)

Out of stock

This product is currently sold out!

No worries! Please enter your e-mail address and we will promptly notify you as soon as the item is back in stock.

0 users joined the waitlist for this item.

Great! You have been added to the waitlist for this product. Please check your inbox and confirm the subscription to this waitlist.

0 users joined the waitlist for this item.

Interconnection diagram:

IC705 GW PA1000 picture small

IC705 display

Pairing Icom IC-705 to JUMA Gateway
– Power up JUMA Gateway and IC-705 transceiver
– Go to IC-705 Bluetooth menu. Set Bluetooth ON and Auto Connect ON.
– Go to PAIRING/CONNECT and activate Device Search
– Select JUMA-IC705 Gw (Each Gateway has an individual HEX-number ID, see the sticker on the bottom cover)

RS232 cable small
Band data cable
– Connect a DB9 cable (female-male with all pins connected) from JUMA gateway to JUMA PA1000 BAND DATA connector.
– Select BCD band data in JUMA PA1000
– Activate AUTO BAND in JUMA PA1000 (Green AUTO led should be ON) and check the band tracking
 
3.5mm cable small
PTT cable
– IC-705 provides a 5V compatible open collector PTT output in the tip terminal of the 3.5mm SEND jack.
– Connect a 3.5mm plug cable from IC-705 SEND jack to JUMA PA1000 PTT jack.
– A standard audio cable can be used, both mono and stereo cables are ok.
– Check the PTT functionality.

Note1. Start JUMA Bluetooth Gateway before IC-705 to get auto Blutooth connection.
Note2. Check that IC-705 CI-V address is A4H
Note3. Set TX delay of 20ms in IC-705 to avoid hot switching in an amplifier.

The blue enclosure is transparent and you can follow the operation with the LEDs inside. See LED info here.

Weight 100 g
Dimensions 7 × 7 × 3 cm

Reviews

There are no reviews yet.

Only logged in customers who have purchased this product may leave a review.

Related products

Select your currency
EUR Euro
RON Romanian leu
×

Hi there, please start a chat window with us below or send us an email at support@rowaves.com. You can also use the contact form on the "Contact" page. We are available only  Monday to Friday, from 9-17h. Thank you!

× Get Help