Quality flexible cable for interfacing the PA100D with mcHF transceiver, for PTT (T/R activation). Only manual band selection is available.
Coding: visible white labels at both ends of the cable
Manufacturer: roWaves Technologies
Ordering code: ROW-CA3
Connector 1: installed original cable 3.5mm plug connector
Connector 2: 3.5mm stereo plug (Lumberg KLS-40)
Interconects with: mcHF transceiver (@ ACC connector)
This cable interconnects the JUMA PA100D amplifier with mcHF HF QRP transceiver, for PTT(T/R) activation / enable. Additional to this cable, the user needs the BNC-BNC male coaxial cable for the drive signal of the PA100D PA, coming from mcHF. One end of this cable is plugged in the side panel of the mcHF TRx (ACC. jack) and the other end of this cable is plugged in the rear panel of the PA100-D amplifier (T/R – 3.5mm jack). The ends of this cable CAN NOT be reversed since the connections inside are different.
Nu există recenzii până acum.